Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads of the Hyundai Tucson

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Brake pads

See other generations:
Video tutorial

In this brief and simple guide, you will learn how to remove and replace the rear brake pads and handbrake pads of the Hyundai Tucson. First, raise the vehicle at the rear and begin removing the wheel.

Then, unscrew the bolts securing the brake caliper to remove it from the disc, as shown in the video. At this point, lever the piston back in, then remove and insert the new brake pads (in the correct orientation); finally, refit the rear brake caliper, following the video tutorial to the end!


Updated on 15 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Hyundai Tucson?
How to Replace the Front Brake Pads on a Hyundai Tucson?
Hyundai Tucson (2015-2021 / MK 3, TL) To replace the front brake pads on a Hyundai Tucson, lift the car to loosen the bolts securing the corresponding wheel. Remove the wheel to access th…
How to Change the Rear Brake Pads on a Hyundai Tucson
How to Change the Rear Brake Pads on a Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) Replacing the rear brake pads on a Hyundai Tucson has never been easier thanks to our short video tutorial that will explain step by step how to carr…
How to Replace the Front Brake Pads on a Hyundai Tucson
How to Replace the Front Brake Pads on a Hyundai Tucson
Hyundai Tucson (2004-2009 / JM, MK 1) Follow these steps to replace the front brake pads on a Hyundai Tucson. Lift the vehicle on a column jack (crick) to the desired height, then remove …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos