Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Brake Pads on a Hyundai Tucson

Model: Hyundai Tucson TL, MK 3 - Years 2015-2021
Part: Brake pads

Video tutorial
Detailed instructions - Replacing the rear brake pads on a Hyundai Tucson has never been easier thanks to our short video tutorial that will explain step by step how to carry out this operation. You will need a 14mm spanner and a flathead screwdriver. Start by lifting the car to remove the front wheel, also remove the wheel arch liner and access the brake pads. To remove them, you will need to use the 14mm spanner. Remove the piston and then work on the caliper piston. Insert the new pads using a screwdriver to push them in, and reassemble everything as shown in the video.

Updated on 4 September 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads of the Hyundai Tucson
How to Replace the Rear Brake Pads of the Hyundai Tucson
Hyundai Tucson (2015-2021 / TL, MK 3) In this brief and simple guide, you will learn how to remove and replace the rear brake pads and handbrake pads of the Hyundai Tucson. First, raise t…
How to Replace the Front Brake Pads on a Hyundai Tucson?
How to Replace the Front Brake Pads on a Hyundai Tucson?
Hyundai Tucson (2015-2021 / TL, MK 3) To replace the front brake pads on a Hyundai Tucson, lift the car to loosen the bolts securing the corresponding wheel. Remove the wheel to access th…
How to Replace the Front Brake Pads on a Hyundai Tucson
How to Replace the Front Brake Pads on a Hyundai Tucson
Hyundai Tucson (2004-2009 / JM, MK 1) Follow these steps to replace the front brake pads on a Hyundai Tucson. Lift the vehicle on a column jack (crick) to the desired height, then remove …

Other guides you may be interested in

Where to Find the Fuses in the Nissan Qashqai

The fuse box in the Nissan Qashqai's cabin is located to the left of the steering wheel, where there is a small cover. Pull it off to access the fuse and relay box. To replace a fuse, if that is the cause of the issue, take a small pair of pliers and remove the fuse of the non-functioning component. Check that the bridge inside the fuse is not broken; if it is broken, replace the fuse with a new one of the same amperage as the old one. If the bridge is intact, the fuse is functioning correctly.

Watch the video!


by ScegliAuto

More videos