Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear brake light of a Hyundai Tucson?

Model: Hyundai Tucson NX4, MK 4 - Years 2022-2026
Part: Tail light

To remove the rear brake light of a Hyundai Tucson, start by opening the rear hatch to access the light area. Once the light is exposed, locate the fastening pins and screws that hold it in place on the car body. Using the appropriate tools, such as a screwdriver or a wrench, unscrew the pins or screws and carefully remove the light from its housing. During this operation, make sure to pay attention to the electrical wiring connected to the light to avoid damage. Once the light is removed, you can replace the brake bulb if necessary or perform other maintenance operations. When reinstalling the light, make sure to tighten the pins or screws securely to ensure proper sealing and functionality of the light. Finally, reposition the inner lining panel, if necessary, and close the rear hatch.

Posted on 19 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads of the Hyundai Tucson
How to Replace the Rear Brake Pads of the Hyundai Tucson
Hyundai Tucson (2015-2021 / TL, MK 3) In this brief and simple guide, you will learn how to remove and replace the rear brake pads and handbrake pads of the Hyundai Tucson. First, raise t…
Removing the Rear Light on the Hyundai Tucson MK3
Removing the Rear Light on the Hyundai Tucson MK3
Hyundai Tucson (2015-2021 / TL, MK 3) In this guide, you will discover how to remove and replace the rear light on the Hyundai Tucson third series, following these simple and quick steps.…
How to Remove the Rear Light on a Hyundai Tucson?
How to Remove the Rear Light on a Hyundai Tucson?
Hyundai Tucson (2015-2021 / TL, MK 3) To replace the rear light on a Hyundai Tucson, open the boot and loosen the bolts located between the seal and the light itself. By removing the bolt…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos