Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bumper on the Hyundai Tucson

Model: Hyundai Tucson JM, MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009
Part: Rear bumper

See other generations:
Video tutorial

Open and lift the boot lid and remove the screws located on the inner side of the headlamp. This will allow you to extract the headlamp and disconnect the plug at its rear.

Repeat the process on the other side. Next, remove the screws that were hidden under the headlamp, then remove all the screws along the edge of the boot lid. Finally, remove the screws located on the bottom of the bumper and those found inside the wing.

For reassembly, simply retrace the steps in reverse.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper on the Hyundai Tucson?
How to Remove the Rear Bumper on the Hyundai Tucson?
Hyundai Tucson (2004-2009 / JM, MK 1) In this tutorial, you will see how to remove the rear bumper on the first generation Hyundai Tucson, a very quick operation. First, remove both tail …
How to Dismantle the Rear Bumper on the Hyundai Tucson?
How to Dismantle the Rear Bumper on the Hyundai Tucson?
Hyundai Tucson (2015-2021 / MK 3, TL) In this tutorial, you will see how to dismantle the rear bumper on the Hyundai Tucson, a very simple and quick operation. First, open the boot, then …
How to remove the front bumper of the Hyundai Tucson.
How to remove the front bumper of the Hyundai Tucson.
Hyundai Tucson (2022-2026 / NX4, MK 4) In this short and simple guide, we will see the instructions that will allow us to disassemble and replace the front bumper of the Hyundai Tucson. Fi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos