|
Do it yourself
| |||
| ||||
How to Reset the Tyre Pressure on a Hyundai Inster
Model: Hyundai Inster
MK 1
- Years:
2024, 2025, 2026
Video tutorial
In this video, we can see how to reset the tyre pressure on a Hyundai Inster: first, we need to physically check the tyre pressures against the values indicated on the label found on the left front door pillar. The values are indicated for the vehicle with only the driver and for a fully loaded car, with two different tyre sizes and in PSI (pounds per square inch, the measurement used in Anglo-Saxon countries) and in bar (the measurement used in EU countries). Then, check the multimedia screen using the "menu" button located on the switch panel to the left of the steering wheel: go to menu number 4 and press the knob to confirm your selection. Go to "set" to enter the values to be input, confirm, and the vehicle will store the values you previously entered by inflating the tyres.
Posted on 28 February 2026 by ScegliAuto
Related tutorials
Hyundai Inster
(2024-2026 /
MK 1)
When the TPMS light comes on in the Hyundai Inster vehicle, it means that the tire pressure needs to be adjusted. To perform this operation, we need …
Hyundai Inster
(2024-2026 /
MK 1)
In this guide, we will see the instructions that will allow us to set up the satellite navigator on the Hyundai Inster. First, let's get on board the…
Hyundai Inster
(2024-2026 /
MK 1)
Let's see how to unlock the charging cable of the Hyundai Inster in case it gets stuck inside the car. There is indeed an emergency procedure that be…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Replace the Thermostat on a Fiat Panda 169
This video outlines all the necessary steps to replace the thermostat on a Fiat Panda 169, including how to replace the temperature sensor. By following the steps in this video, you can replace the faulty thermostat on your Fiat Panda yourself, saving on labour costs charged by a garage. This job will require some time and specific tools to disassemble and reassemble everything attached to the thermostat to replace it without causing damage to the vehicle. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |