Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Unit on a Hyundai I10

Model: Hyundai I10 MK 2, IA - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Tail light

See other generations:
Video tutorial

For this operation, you will need a cross-head screwdriver (or a drill bit for quicker work). The rear light has two cross-head screws visible from the outside; remove both.

Once the screws are removed, the light is held by plastic clips. Firmly grasp the light and pull decisively outward.

A good amount of controlled force is needed to release the clips. On the back of the light, you will find three bulb holders (position light, stop light, and reverse light).

For each bulb holder, rotate it counter-clockwise by 1/4 turn, then pull it out of its socket. At this point, the light is completely free and can be replaced with a new one (you might have found it on AliExpress with code 1005010279882941 for £49.99 each with free delivery).

To reassemble the light, simply follow the steps in reverse order.


Posted on 4 September 2026 by ScegliAuto


Related tutorials

Replacement of the front headlight of the Hyundai I10
Replacement of the front headlight of the Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Today we will see the instructions for disassembling and replacing the front headlight of the Hyundai I10. First, we open the hood of the car and sta…
How do you replace the front headlight bulb of the Hyundai I10?
How do you replace the front headlight bulb of the Hyundai I10?
Hyundai I10 (2007-2013 / PA, MK 1) To replace the headlight bulb of the Hyundai I10, you need to open the hood so that you can access the components inside it: there will be a molding …
How to Remove and Replace the Stop Bulb on a Hyundai i10
How to Remove and Replace the Stop Bulb on a Hyundai i10
Hyundai I10 (2013-2020 / MK 2, IA) In this video, see how to remove and change the stop bulb on a Hyundai i10: you will need a Philips screwdriver to remove the three screws located on…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos