Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a Hyundai Tucson

Model: Hyundai Tucson NX4, MK 4 - Years 2022-2026
Part: Service warning light

To reset the service light on a Hyundai Tucson, turn on the ignition without starting the engine and use the central touchscreen display. Select Setup, then enter the Vehicle menu. Open the Cluster section and select Service Interval. Within the service screen, press Reset and confirm the operation when the relevant request appears on the display. The system will reset the mileage and remaining time associated with periodic maintenance. Once the procedure is complete, turn off the ignition and wait a few seconds, then turn it back on to check that the service warning is no longer displayed. In some configurations, the Service Interval option may be found directly in the vehicle settings, but the reset is still performed from the central display.

Posted on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Hyundai Tucson?
How to reset the "Service" light on a Hyundai Tucson?
Hyundai Tucson (2022-2026 / NX4, MK 4) To reset the "Service" light on a Hyundai Tucson, you can use the buttons on the steering wheel to access the vehicle settings menu. Once in the menu…
How to reset the "Service" light on a Hyundai Tucson?
How to reset the "Service" light on a Hyundai Tucson?
Hyundai Tucson (2022-2026 / NX4, MK 4) To reset the "Service" light on a Hyundai Tucson, start by turning on the instrument panel. Next, access the onboard computer by pressing the navigat…
How to reset the "Service" light on a Hyundai Tucson?
How to reset the "Service" light on a Hyundai Tucson?
Hyundai Tucson (2022-2026 / NX4, MK 4) To reset the "Service" light on a Hyundai Tucson, proceed as follows. Start the car and wait for all the dashboard checks to complete, including the …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos