Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Original Car Radio

Model: Hyundai Santa Fe MK 1 - Years 2000-2006
Part: Car stereo

To remove the original car radio, first extract the ashtray and unscrew the screws securing the climate control buttons: once the screws are removed, pull the controls forward (it is advisable to disconnect the connectors and remove the controls to facilitate the subsequent disassembly operations).
At this point, unscrew the screws securing the frame around the car radio and detach it along with the air vents: now you can unscrew the four screws securing the car radio (located at each corner) and pull it out of its housing, disconnecting the connectors attached to it.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Original Car Radio
Removing the Original Car Radio
Hyundai Santa Fe (2006-2012 / MK 2) Remove the screws securing the knee pad on the driver's side to slightly move it away from its position (this is necessary to allow the removal of th…
Removing the Car Radio from the Hyundai Santa Fe MK2
Removing the Car Radio from the Hyundai Santa Fe MK2
Hyundai Santa Fe (2006-2012 / MK 2) Discover how to remove the car radio along with the dashboard panel on the Hyundai Santa Fe second series in this video. First, get inside the vehicl…
How to Remove the Radio from a Hyundai Santa Fe
How to Remove the Radio from a Hyundai Santa Fe
Hyundai Santa Fe (2006-2012 / MK 2) How do you remove the radio from your Hyundai? Watch this video carefully to see how to carry out the removal. Using a plastic or metal trim tool, le…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos