Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : How to disassemble the car stereo of a Hyundai Santa Fe

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 2 - Years 2006-2012
Part: Car stereo
Operation: How to disassemble the car stereo of a Hyundai Santa Fe

How do we disassemble the car stereo of our Hyundai? Let's see carefully in this video how to perform the disassembly. With a plastic or metal spatula, lever off the wood-like molding. Let's detach it away from the dashboard, then, remove the plastic holder positioned above it. Using a screwdriver, unscrew the locking screws of the central panel of the car radio, where the air vents are, remove the frame, being careful not to damage the wiring of the same. Finally we unscrew the four fastening screws of the car radio. Let's take the stereo out of the house and put on a new one.


Posted on 28 September 2023 by ScegliAuto



Where is the fuse box located in the 2007 Hyundai Santa Fe?
Hyundai Santa Fe (2006-2012 / MK 2) If you want to locate the box containing all the fuses of your 2007 Hyundai Santa Fe, you must follow the various steps described in this new guide d
How to replace the air conditioning radiator on Hyundai Santa Fe
Hyundai Santa Fe (2000-2006 / MK 1) Let's see in this guide the steps that will allow us to disassemble and replace the air conditioning radiator of the Hyundai Santa Fe, following the
Where is the fuse box located in the 2009 Hyundai Santa Fe?
Hyundai Santa Fe (2006-2012 / MK 2) In this new mini guide dedicated to all of you who own a second-generation Hyundai Santa Fe (year 2009), we will discover the steps you need to take

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos