Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gear Gaiter on Hyundai i10

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Shifter boot

The gear gaiter on the Hyundai i10? Here’s how to remove the gaiter and knob from the gear lever. Unscrew the knob until it comes off the lever, then detach the gaiter frame from the plastic trim on the centre tunnel. Once you have removed the gaiter to be replaced, fit the new piece. Attach the gaiter to the plastic frame, then slide the cover onto the gear lever (secure the clip as shown in the video). Lower the gaiter until it clicks into place within the plastics of the centre tunnel. Finally, screw the knob back onto the gear lever.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Clutch Replacement on the Hyundai I10 1.1 Petrol
Clutch Replacement on the Hyundai I10 1.1 Petrol
Hyundai I10 (2007-2013 / PA, MK 1) In this video tutorial, discover the steps to perform a DIY clutch change on the first series Hyundai I10 with a 1.1 petrol engine. First, lift the v…
How to Replace the Gear Oil on a Hyundai I10?
How to Replace the Gear Oil on a Hyundai I10?
Hyundai I10 (2007-2013 / PA, MK 1) To replace the gear oil on a Hyundai I10, access the underside of the engine bay, where you will need to remove the protective panel covering the bot…
How to DIY Replace the Clutch on the Hyundai i10
How to DIY Replace the Clutch on the Hyundai i10
Hyundai I10 (2007-2013 / PA, MK 1) On the Hyundai i10, replacing the clutch requires removing the gearbox. Place the Hyundai i10 on axle stands, disconnect the battery, and clear the s…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos