Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob and Gaiter on a Hyundai I10

Model: Hyundai I10 PA, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Shifter boot

See other generations:
Video tutorial

Today, we will see in this video tutorial how to remove and replace the gear knob and gaiter on a Hyundai I10. First, get in the vehicle and start by detaching the gaiter from the base; then pull firmly upwards on the gear knob, removing it from the lever as shown in the video.

At this point, remove the gaiter and replace it with the new one; then refit the gaiter followed by the knob onto the lever, ensuring that both are securely attached to the gear lever!


Updated on 5 July 2026 by ScegliAuto


Related tutorials

Replacing the Gear Gaiter on Hyundai i10
Replacing the Gear Gaiter on Hyundai i10
Hyundai I10 (2007-2013 / PA, MK 1) The gear gaiter on the Hyundai i10? Here’s how to remove the gaiter and knob from the gear lever. Unscrew the knob until it comes off the lever, then…
Replacing the Gear Knob and Gaiter on the Hyundai I10
Replacing the Gear Knob and Gaiter on the Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Today's procedure will show you how to remove and replace the gear knob and gaiter on the Hyundai I10. First, get inside the vehicle and start unscre…
How to Remove the Gear Knob of a Hyundai I10
How to Remove the Gear Knob of a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Before you can start, sit in the driver’s seat of your Hyundai I10. Begin by firmly grasping the gear knob with your hand. Then, unscrew the gear kno…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos