Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Radio in the Hyundai Ix 35

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Warning light – error code

If you are wondering how to reset the radio in your Hyundai Ix 35, just read the following guide and follow the various instructions provided. First, ensure the car is turned off and then locate the small compartment on the left side of the dashboard (driver's side). Fully lower it, and you will see the fuse box. At this point, locate the plastic component that is yellow (located in the upper central area) and gently pull it towards you to release it. Once done, push it back in to reposition it correctly. The reset is complete, and you just need to close the compartment.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install an Android Car Radio in the Hyundai Ix35
How to Install an Android Car Radio in the Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) In this video tutorial, you will see the procedure to dismantle and replace the original car radio with an Android one in the Hyundai Ix35. First, di…
How to Reset the Clock on a Hyundai IX35
How to Reset the Clock on a Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) This video demonstrates how to reset the time on the radio of a Hyundai IX35. In this video, the vehicle is equipped with the basic radio, which does…
How to Remove the Radio from a Hyundai IX35
How to Remove the Radio from a Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Before you begin, sit in the driver's seat of your Hyundai IX35. Start by prying off and removing the upper cover of the radio using a thin but sturd…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos