Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Palisade
    4. : How to replace the rear light bulb on the Hyundai Palisade?

Hyundai Palisade - Video tutorial

Model: Hyundai Palisade MK 1 - Years 2019-2024
Part: Rear light bulb
Operation: How to replace the rear light bulb on the Hyundai Palisade?

In order to replace the rear light bulb of the Hyundai Palisade you have to go to open the tailgate, so that you go to loosen the screws that are next to the headlight. By unscrewing these screws it will be possible to extract the entire optical group from inside its housing, so that the bulbs inside it can be extracted. After the old bulb has been removed, the new one can be inserted into its housing by re-connecting the headlight to the connector. Finally, it will be necessary to place it in its housing, fixing it with the screws.


Posted on 29 April 2024 by ScegliAuto



How to reset the service light on the Hyundai Palisade.
Hyundai Palisade (2019-2024 / MK 1) In this new mini guide dedicated to your 2022 Hyundai Palisade, we will discover the various steps necessary to manually reset the service light with
Where is the spare wheel of the Hyundai Palisade located?
Hyundai Palisade (2019-2024 / MK 1) The spare wheel of the Hyundai Palisade is located under the lower axle of the car, in the trunk area: in order to reach it, you will need to open th
How to reset the oil light on the Hyundai Palisade.
Hyundai Palisade (2019-2024 / MK 1) If you own a Hyundai Palisade and are wondering how to manually reset the oil warning light, all you have to do is read the following guide and follo

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos