Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Reina Verna
    4. : How to install the led position bulb in the Hyundai Reina

Hyundai Reina Verna - Video tutorial

Model: Hyundai Reina Verna MK 1 - Years 2017-2024
Part: Headlight
Operation: How to install the led position bulb in the Hyundai Reina

To replace the parking light bulb with a led one on the Hyundai Reina it is necessary to access the engine compartment. Then remove the inspection cap of the projector by turning it counterclockwise. Now, having identified the wiring with lamp holder (of the position light is the small one), remove it from its seat and you will find yourself with the small lamp in plain sight. At this point, disconnect the light bulb from the connector and insert the new LED one and after that, try its operation. Finally, connect the wiring with the lamp holder in its seat on the projector and close it with the appropriate screw cap. Perform the same operation for the other projector.


Posted on 6 May 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos