Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on a Hyundai Eon?

Model: Hyundai eON MK 1 - Years 2011-2019
Part: Clock

You can set the clock on the Hyundai Eon directly from the radio. To do this, press the "clock" button twice, and then use the volume knob to set the hour. Once done, click the "setup" button to confirm and proceed to set the minutes. Repeat the same operation using the knob to select the correct value and press "setup" at the end. At this point, you have finished setting the clock. As seen, this operation is within everyone's reach and does not require any tools or access to the ECU settings.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the clock of the Hyundai Eon
How to adjust the clock of the Hyundai Eon
Hyundai eON (2011-2019 / MK 1) Setting the clock of the Hyundai EON is a simple and quick operation to be carried out independently every time we want. To perform this procedure, w…
How to Adjust the Clutch Cable on the Hyundai Eon
How to Adjust the Clutch Cable on the Hyundai Eon
Hyundai eON (2011-2019 / MK 1) To adjust the clutch cable on the Hyundai Eon, open the hood to access the components inside the engine bay: to reach the clutch cable, you will need…
How to remove the front headlight from a Hyundai Eon?
How to remove the front headlight from a Hyundai Eon?
Hyundai eON (2011-2019 / MK 1) To remove the front headlight from a Hyundai Eon, open the hood to access the components in the engine compartment. Specifically, you will need to un…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos