Do it yourself
| ||||
|
Hyundai Matrix - Video tutorial
Model: Hyundai Matrix
MK 1
- Years 2001-2010 In order to replace the door panel of the Hyundai Matrix you must first loosen the screw located in the housing of the interior handle, then pry inside to remove it completely. Subsequently, it will be necessary to remove the cover caps of the screws located on the side of the panel and unscrew the screws below. Those located in the lower part of the door will also have to be removed. Once all the screws have been removed, it will be necessary to detach the panel by disconnecting the connectors from the inside.
Posted on 8 May 2022 by ScegliAuto
Other guides that may interest you
|
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |