Do it yourself
Frequently asked questions about cars and motorcycles

Removing the door panel on Hyundai Matrix

Model: Hyundai Matrix MK 1 - Years 2001-2010
Part: Door trim panel

In this video tutorial, you will see the steps to remove the front door panel of a Hyundai Matrix. First, open the front door and remove all the fixing screws found on the panel, from the side screws to those hidden by plastic caps; then unclip the handle by removing the cable located at the back, and start unclipping the panel by prying at the sides in multiple places; finally, disconnect the electrical connector of the window switch. The video also shows how to remove the window mechanism!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai Matrix (2001-2010 / MK 1) To replace the door panel on a Hyundai Matrix, first loosen the screw located in the handle housing, then pry it out completely. Next, remove the scr…
Hyundai Matrix (2001-2010 / MK 1) The following steps will guide you through removing and replacing the dashboard of the Hyundai Matrix. First, get into the vehicle and open the front…
Hyundai Matrix (2001-2010 / MK 1) Learn how to replace the engine air filter on a Hyundai Matrix: open the car door, pull up the engine compartment release lever located at the bottom…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos