Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Santro
  6. : How to replace the front wiper blades on Hyundai Santro

Hyundai Santro - Video tutorial

Model: Hyundai Santro MK 3 - Years 2018-2024
Part: Windscreen wipers
Operation: How to replace the front wiper blades on Hyundai Santro

If we need to replace the front wiper blades on this car model, we can find the directions and methods to follow in the description below and in the video. To begin we must lift the rod of the first wiper and proceed to release the locking pin located in the center of the blade. Then rotate the brush 90Â ° with respect to the rod and remove it. Then take the new brush to hook it onto the pin and then fasten the block again. Then lower the rod to make the brush touch the windshield and then proceed, following the same instructions, to replace the second brush as well.


Posted on 21 June 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos