Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Wiper Control Lever in the Hyundai Santro?

Model: Hyundai Santro MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will see how to replace the wiper control lever in the Hyundai Santro, a very simple operation. First, ensure that the key is not in the ignition for safety.

Then, remove the 3 screws indicated with a Phillips screwdriver. Once done, pry off the upper cover of the steering column with a plastic spatula and remove it along with the lower cover.

At this point, disconnect the lever connector and unlock the clip indicated with a small flat screwdriver. To install the replacement, follow the reverse procedure.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

Hyundai Santro (1998-2015 / MX) In this video tutorial, you will learn how to disassemble and replace the outer door handle of the front door of the Hyundai Santro by following thes…
Hyundai Santro (2018-2025 / MK 3) If you need to replace the front windshield wiper blades on this vehicle model, you can find the instructions and procedures to follow in the descrip…
Hyundai Santro (1998-2015 / MX) In today's video, you will see how to replace the taillight assembly on a Hyundai Santro. First, open the trunk. Next, unscrew the screws securing th…

Where is the Engine Fan Fuse Located in a Citroen C3?

The Citroen C3 contains two fuse boxes. The first fuse box is located inside the cabin behind the passenger side glove compartment. The second fuse box is under the bonnet near the battery. The fuse for the engine fan is located in the second fuse box and is labelled F8, rated at 25 Amperes. To replace the fuse, open the fuse box cover, remove the fuse with pliers, and insert a new fuse of the same amperage. Close the fuse box and the bonnet.

Watch the video!


by ScegliAuto

More videos