Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Ioniq
  6. : How to remove the front bumper of the Hyundai Ioniq

Hyundai Ioniq - Video tutorial

Model: Hyundai Ioniq MK 1 - Years 2016-2022
Part: Front bumper
Operation: How to remove the front bumper of the Hyundai Ioniq

In today's video tutorial we will see the steps that will allow us to disassemble and replace the front bumper of the Hyundai Ioniq. First of all we lift the car with the jack, even only on the front, and we begin to remove all the plastic clips that we find under the bumper; we carry out the same operation by removing the clips located on both sides of the front wheel arches, as shown in the video. At this point we remove the additional clips present above the bumper, in order to unhook it from the sides until it is completely removed; we apply the reverse procedure for reassembly!


Posted on 16 July 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos