Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Kona
    4. : How to reset the service warning light on a Hyundai Kona

Hyundai Kona - Video tutorial

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: Checks and maintenance
Operation: How to reset the service warning light on a Hyundai Kona

In this short video tutorial we will go to see how to reset the maintenance warning light on a Hyundai Kona. Let's start by turning on the instrument panel but without starting the car, now let's press the "menu" button located on the right of the steering wheel, press it until we reach the "User settings" section. Now, using the directional arrows, scroll down the menu until you reach the "Service interval" item and give the ok using the appropriate key always on the push-button panel, now in this item we press and keep the "ok" button until the confirmation of the reset, give it the ok and we have completed the reset.


Posted on 4 August 2022 by ScegliAuto

    Frequently Asked Questions

    • Hyundai Kona 2017-2023 - How much does the Hyundai Kona service cost? Read Answer
    • Hyundai Kona 2017-2023 - What does the warning light with a steering wheel and an exclamation mark in the Hyundai Kona mean? Read Answer
    • Hyundai Kona 2017-2023 - When to service the Hyundai Kona Hybrid? Read Answer
    • Hyundai Kona 2017-2023 - What are the spies of the Hyundai Kona? Read Answer
    • Hyundai Kona 2017-2023 - How many km do you have to carry out a service on the Hyundai Kona? Read Answer
    • Hyundai Kona 2017-2023 - What does the urea warning light inside the instrument cluster of a Hyundai Kona mean? Read Answer
    • Hyundai Kona 2017-2023 - How many km should the first service be performed on a Hyundai Kona? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos