Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Kona
    4. : How to reset the service light on the Hyundai Kona.

Hyundai Kona - Video tutorial

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: Instrument cluster
Operation: How to reset the service light on the Hyundai Kona.

To correctly complete the manual reset of the service light on your Hyundai Kona, it is necessary to follow a procedure identical to that already used in other car models produced by Hyundai. Let's find out what the various steps are. First of all, go inside the vehicle and turn on the instrument panel. Immediately after, press the menu button several times until you enter the car settings. At this point, select "Service interval". Then, hold down the "OK" button and release it as soon as you are asked if you want to proceed with resetting the light. Finally, select "Yes" and you're done.


Posted on 22 June 2023 by ScegliAuto



How to reset the "Service" indicator on a Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) Good morning, the purpose of this guide is to reset the "Service" light on our Hyundai Kona. Start the car's instrument panel by pressing the ignitio
How to reset the service light on the Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) In this tutorial we can see how to reset the service in the Hyundai Kona, an extremely simple and quick operation, to be carried out only once all sc
How to reset the service light on the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Following these short and simple steps, we will see how to reset the service light for the regular maintenance of the engine oil change in the Hyunda

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos