Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. eON
    4. : How to adjust the clutch cable of the Hyundai Eon?

Hyundai eON - Video tutorial

Model: Hyundai eON MK 1 - Years 2011-2019
Part: Clutch
Operation: How to adjust the clutch cable of the Hyundai Eon?

To be able to adjust the clutch cable of the Hyundai Eon you need to open the hood, so that you have access to the components inside the engine compartment: in order to reach the clutch cable you will need to loosen the battery fixing bolts, so that it last can be extracted. Under it the clutch cable will be identified: at the base of the cable there will be a gear that must be screwed or unscrewed according to how hard or soft the clutch pedal is to be made. After the adjustment has been made it is advisable to check the pedal before reassembling all the components.


Posted on 18 August 2022 by ScegliAuto

Other guides that may interest you

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos