Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Accent
    4. : How to reset the TPMS on the Hyundai Accent

Hyundai Accent - Video tutorial

Model: Hyundai Accent MK 4, RB, RC - Years 2010-2017
Part: -board computer
Operation: How to reset the TPMS on the Hyundai Accent

The TPMS "tire pressure monitoring system" is a system that allows you to control tire pressure using sensors. If the pressure of one of the tires falls below a set value, the orange warning light on the instrument panel (top left) comes on. First of all, it is necessary to check and restore the tire pressure (refer to the pressures specified in the car specifications), after which, access the driver's seat, turn the ignition key and turn on the ignition. On the left side of the dashboard there are some commands, including the TPMS reset one, then press this command to reset the warning light.


Posted on 11 November 2022 by ScegliAuto



How to reset TPMS on Hyundai Accent?
Hyundai Accent (2017-2024 / YC, HC, MK 5) If, while we are travelling, the low tire pressure warning light comes on with our car, the first thing to do is to check the pressures of the four t
How to reset the tire warning light in Hyundai Accent?
Hyundai Accent (2017-2024 / YC, HC, MK 5) In this tutorial we can see how to reset the tire warning light in Hyundai Accent. This simple and fast operation must be carried out only after rest
How do you reset the tire pressure light on the Hyundai Accent?
Hyundai Accent (2017-2024 / YC, HC, MK 5) In order to reset the tire pressure warning light of the Hyundai Accent, you first need to inflate the tires, bringing them back to the correct press

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos