Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Hyundai Palisade

Model: Hyundai Palisade LX2, MK 1 - Years 2019-2026
Part: Front bumper

In today's video, you will see how to remove the front bumper of the Hyundai Palisade. First, open the hood. Start by removing the fastening pins located at the front that hold the center grille in place. Now, position yourself under the vehicle and proceed to remove the metal shield by unscrewing the corresponding bolts, possibly using a power screwdriver. Once done, detach the plastic from the wheel wells and carefully release the bumper. With a bit of patience, you should be able to do it. Before pulling it off completely, remember to disconnect the power connectors.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper from a Hyundai Palisade?
How to Remove the Front Bumper from a Hyundai Palisade?
Hyundai Palisade (2019-2026 / LX2, MK 1) To remove the front bumper from a Hyundai Palisade, open the hood to access the screws that secure the bumper from the top: these screws must be unsc…
How to Install the Canvasback Cargo Liner on a Hyundai Palisade
How to Install the Canvasback Cargo Liner on a Hyundai Palisade
Hyundai Palisade (2019-2026 / LX2, MK 1) In this video, we will see the correct way to install the dedicated protection for the Hyundai Palisade, available for $239.00 from Canvasback, with …
How to reset the TPMS light on the 2020 Hyundai Palisade
How to reset the TPMS light on the 2020 Hyundai Palisade
Hyundai Palisade (2019-2026 / LX2, MK 1) The procedure that allows you to manually reset the TPMS alarm light on the instrument panel of your Hyundai Palisade is really simple. Below we expl…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos