Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. I10
  6. : When to replace the timing belt on the Hyundai I10?

Hyundai I10 - Video tutorial

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Timing belt
Operation: When to replace the timing belt on the Hyundai I10?

It synchronizes the movement of the crankshaft (pistons) with that of the camshaft (intake and exhaust valves): as you may have already guessed, we are talking about the timing belt. Made of a plastic material, with a certain elasticity and resistance, it withstands continuous external stresses. Always taut, the belt is also subjected to considerable temperature changes. Among the various reasons why it must always be in good shape, there is one very specific one: its tearing almost always causes very important damage to the engine. That is, breakage of pistons, valves, crankshaft. Moral: it's better to spend immediately to take care of the belt, rather than shelling out several money later, once the damage has been done. For this model of car, the manufacturer provides for the replacement of the belt every 120,000 km.


Posted on 26 April 2023 by ScegliAuto

    Frequently Asked Questions

    • I10 2013-2020 - When to replace the timing belt in the Hyundai I10? Read Answer
    • I10 2013-2020 - How much does it cost to replace the timing belt of a Hyundai I10? Read Answer
    • I10 2013-2020 - What is the cost for the timing chain for the Hyundai I10? Read Answer
    • I10 2013-2020 - When does the timing belt of a Hyundai i10 need to be replaced? Read Answer
    • I10 2007-2013 - After how many years to replace the timing belt of the Hyundai i10 Read Answer
    • I10 2007-2013 - How many km to replace the timing belt of the Hjundai i10? Read Answer
    • I10 2007-2013 - How many km do you replace the timing belt of the Hyundai I10 1.1? Read Answer
    • I10 2007-2013 - How much does the third service cost to the Hyundai I10? Read Answer
    • I10 2007-2013 - How many kilometers should the distribution be replaced on the Hyundai I10? Read Answer
    • I10 2007-2013 - After how many km it is necessary to change the timing belt of the Hyundai i10? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos