Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Hyundai i10?

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Timing belt

To replace the timing belt on a Hyundai i10, open the bonnet to access the components in the engine bay. On the left side, locate the timing belt protection plate and remove it by unscrewing the fixing screws. Next, loosen the central nut of the tensioner pulley to reduce the tension on the belt and extract it from its housing. After removal, fit the new belt around the pulleys, ensuring everything functions correctly.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How and When to Change the Timing Belt on the Hyundai I10 1.1
How and When to Change the Timing Belt on the Hyundai I10 1.1
Hyundai I10 (2007-2013 / PA, MK 1) This brief guide provides the main instructions on how and when to change the timing belt on the first-generation Hyundai I10 with a 1.1 petrol engin…
When to replace the timing belt of a Hyundai I10?
When to replace the timing belt of a Hyundai I10?
Hyundai I10 (2007-2013 / PA, MK 1) .. in your owner's manual. The video tutorial shows how to replace the timing belt on a Hyundai i10, but since it is a fairly complex job, it is recommended.. …
How to Replace the Timing Belt on a Hyundai I10?
How to Replace the Timing Belt on a Hyundai I10?
Hyundai I10 (2013-2020 / IA, MK 2) To replace the timing belt on a Hyundai I10, lift the car to access the bolts securing the front right wheel: this wheel must be removed along with t…

Other guides you may be interested in

    Frequently Asked Questions

    • I10 2013-2020 - When does the timing belt of a Hyundai i10 need to be replaced? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos