Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Timing Belt on a Hyundai I10?

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Timing belt

To replace the timing belt on a Hyundai I10, lift the car to access the bolts securing the front right wheel: this wheel must be removed along with the corresponding inner wheel arch cover. You can then slide the belt off the crankshaft pulley, and by opening the bonnet, disconnect the belt from the camshaft pulley. After removing the old belt, install the new one, ensuring everything functions correctly.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai I10 (2007-2013 / PA, MK 1) This brief guide provides the main instructions on how and when to change the timing belt on the first-generation Hyundai I10 with a 1.1 petrol engin…
Hyundai I10 (2007-2013 / PA, MK 1) Replacing the water pump of a Hyundai i10 vehicle is a fairly simple operation to perform independently. The water pump of the Hyundai is located nea…
Hyundai I10 (2007-2013 / PA, MK 1) In this guide, you will find instructions to remove and replace the timing belt and water pump on a Hyundai i10 1.1. First, raise the vehicle and rem…

Other guides you may be interested in

    Frequently Asked Questions

    • I10 2013-2020 - When does the timing belt of a Hyundai i10 need to be replaced? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos