Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What to Do if the Radio in the Hyundai i20 Does Not Work

Model: Hyundai I20 IB, MK 2, GB - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Fuse box

See other generations:
Video tutorial

If the radio in your Hyundai i20 does not turn on, the first thing to check is whether its fuse is blown. To do this, open the fuse box inside the cabin, located on the far left side of the dashboard.

Upon opening the cover, you will find the fuse map; locate the radio fuse, which is 15A, and remove it. If it is damaged, as is likely, check the spare fuses contained in the fuse box in the engine compartment, also 15A (these should be number 21 and number 22). Replace the blown fuse with a new spare and close everything up. At this point, you just need to check that the radio works again.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in the Hyundai i20?
How to Replace the Radio in the Hyundai i20?
Hyundai I20 (2014-2021 / IB, MK 2, GB) To replace the radio in the Hyundai i20, use an object to pry off the trim that surrounds the radio and the instrument cluster: once this trim is rem…
How do you reset the Hyundai I20 car radio?
How do you reset the Hyundai I20 car radio?
Hyundai I20 (2008-2014 / MK 1, PB) To make necessary the reset or rather the restoration of the Hyundai I20 car radio, there could be a general malfunction, an attempted theft, and fin…
How to Remove the Radio from a Hyundai i20
How to Remove the Radio from a Hyundai i20
Hyundai I20 (2008-2014 / MK 1, PB) Before starting, sit in the driver's seat of your Hyundai i20. Begin by prying off the radio trim using a thin but sturdy tool, preferably plastic, t…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos