Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cabin Filter on a Hyundai Ioniq

Model: Hyundai Ioniq MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Cabin air filter

Video tutorial

In this tutorial video, you can see how to replace the cabin filter on a Hyundai Ioniq by following a few simple steps: The first thing to do is purchase a new cabin filter. Next, get inside the vehicle, turn off the engine, pull the handbrake, and open the glove compartment.

Remove any items inside the glove compartment, then unscrew the knobs located on the right and left sides inside the compartment. Once these knobs are removed, disconnect the pin located on the outer right side of the compartment.

After removing this part, the glove compartment will lower completely, revealing the cabin filter cover. Press the clips on the cover to remove it from its seat.

Once the cover is off, remove the cabin filter, clean the seat thoroughly, and position the new air filter according to the arrows, following the direction of airflow.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

Hyundai Ioniq (2016-2022 / MK 1) In this video tutorial, you can see where the fuse boxes are located on the Hyundai Ioniq by following some simple steps that will help you manage yo…
Hyundai Ioniq (2016-2022 / MK 1) Replacing the cabin air filter in your Hyundai Ioniq is a very important task that should be done periodically, especially if you frequently use the …
Hyundai Ioniq (2016-2022 / MK 1) To replace the battery on the Hyundai Ioniq, open the rear hatch of the car to access the components inside the boot: here, detach the covering at th…

Other guides you may be interested in

Where is the Engine Fan Fuse Located in a Citroen C3?

The Citroen C3 contains two fuse boxes. The first fuse box is located inside the cabin behind the passenger side glove compartment. The second fuse box is under the bonnet near the battery. The fuse for the engine fan is located in the second fuse box and is labelled F8, rated at 25 Amperes. To replace the fuse, open the fuse box cover, remove the fuse with pliers, and insert a new fuse of the same amperage. Close the fuse box and the bonnet.

Watch the video!


by ScegliAuto

More videos