Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. ix35
    4. : To reset the service light on the Hyundai IX35.

Hyundai ix35 - Video tutorial

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Instrument cluster
Operation: To reset the service light on the Hyundai IX35.

If you want to manually reset the service light on your Hyundai IX35 (year 2009-2015), you just need to follow the steps described in the following mini guide dedicated to you. First, press the power button and start the instrument panel. Then, locate the menu button located in the lower right area of the steering wheel and press it several times until you see the option for vehicle maintenance on the display. Finally, hold down the button located just below the menu button and release it when the reset of the light is complete. Turn off the instrument panel and you're done.


Posted on 28 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Ix35 2009-2015 - What to do if the TMPS light comes on in a Hyundai IX35? Read Answer
    • Ix35 2009-2015 - What does the yellow engine light on Hyundai IX35 mean? Read Answer
    • Ix35 2009-2015 - What do the warning lights on the Hyundai Ix35 mean? Read Answer
    • Ix35 2009-2015 - Where is the list with the meaning of the warning lights of the Hyundai IX35? Read Answer
    • Ix35 2009-2015 - How do you reset the service warning light on the Hyundai Ix35 Mk1? Read Answer
    • Ix35 2009-2015 - How to reset the oil level warning light on Hyundai ix35? Read Answer
    • Ix35 2009-2015 - Where are the Hyundai IX35 warning lights shown? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos