Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Kona
    4. : How to perform a service reset on a Hyundai Kona

Hyundai Kona - Video tutorial

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: -board computer
Operation: How to perform a service reset on a Hyundai Kona

In this video tutorial, we can see how it is possible to perform a service reset on a Hyundai Kona, following a few simple steps: the first thing to do is vehicle maintenance such as changing the engine oil and filters. After having performed the DIY maintenance, we need to get inside the car, turn off the engine, engage the parking brake, turn on the ignition, use the buttons located on the right side of the steering wheel to access the gear settings, "User Setting" scroll down to the Convenience option and press the OK button on the steering wheel; now you will see the service intervals "Service Interval", scroll down to "reset" and press the OK button.


Posted on 12 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Hyundai Kona 2017-2023 - What spies does the Hyundai Kona have? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos