Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I20
    4. : Where to find the reference tire pressure on the Hyundai I20.

Hyundai I20 - Video tutorial

Model: Hyundai I20 IB, GB, MK 2 - Years 2014-2021
Part: Tires
Operation: Where to find the reference tire pressure on the Hyundai I20.

In this video, we see where to find the tire pressure reference on the Hyundai I20: on all vehicles, we can find a sticker indicating the reference values for tire pressure when the car is empty (with only the driver) and when the car is fully loaded (with passengers and luggage), and the pressures are normally indicated in multiple values: PSI (which is the most commonly used value in Anglo-Saxon countries. One PSI corresponds to 0.0689476 Bar) KPa (which is the international measurement. One Kilopascal corresponds to 0.01 Bar) Bar (which is the standard measurement in the European Union). This label is located in the thickness of the driver's door.


Posted on 17 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Hyundai I20 2014-2021 - What is the tire pressure warning light on Hyundai I20? Read Answer
    • Hyundai I20 2014-2021 - What does the Hyundai TPMS warning light come on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos