Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Pollen Filter

Model: Hyundai Matrix MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Cabin air filter

Video tutorial

Locate the position of the cabin pollen filter, which, in this particular case, is found inside the cabin behind the glove compartment on the passenger side. Open the glove compartment, press the internal side buttons on the walls of the compartment (indicated in the images with red arrows), and pull it downwards.

Press the two clips (indicated by the two red arrows in the images) that secure the cover of the pollen filter housing. Remove the old filter and replace it with the new one. The pollen filter should be replaced every 15,000 miles or at least once a year.

The maintenance operation shown in the images is performed on a Hyundai Matrix.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Air Filter on a Hyundai Matrix
How to Replace the Engine Air Filter on a Hyundai Matrix
Hyundai Matrix (2001-2010 / MK 1) Learn how to replace the engine air filter on a Hyundai Matrix: open the car door, pull up the engine compartment release lever located at the bottom…
Where is the Fuse Box Located Inside the Hyundai Matrix?
Where is the Fuse Box Located Inside the Hyundai Matrix?
Hyundai Matrix (2001-2010 / MK 1) This guide explains how to access the fuse box inside the cabin of a Hyundai Matrix. To reach the fuse box, you need to remove the driver's side glov…
Which Fuse is for the Locks in a Hyundai Matrix?
Which Fuse is for the Locks in a Hyundai Matrix?
Hyundai Matrix (2001-2010 / MK 1) In this video, see where the fuse for the locks is located in a Hyundai Matrix, which is the first thing to check if the locks suddenly stop working.…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos