Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Fog Light Bulbs on the Hyundai Tucson

Model: Hyundai Tucson TL, MK 3 - Years 2015-2021
Part: Fog lights

Today's guide will show you how to dismantle and replace the front fog light bulbs on the Hyundai Tucson, in simple and quick steps. First, move to the side and start by removing the front wheel arch liner to access the fog lights; then remove the plastic protective cap and disconnect the electrical connector of the lights, subsequently removing the bulb, as shown in the video. At this point, install the new fog light bulb of the correct type and fitting; finally, reassemble everything!

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Hyundai Tucson?
Where are the fuses located in the Hyundai Tucson?
Hyundai Tucson (2010-2015 / LM, MK 2) The fuses in the Hyundai Tucson are divided within the designated fuse boxes installed in the vehicle: in this type of car, you can find two boxes fo…
Where are the fuses located in the Hyundai Tucson?
Where are the fuses located in the Hyundai Tucson?
Hyundai Tucson (2004-2009 / JM, MK 1) The fuse boxes of the Hyundai Tucson are responsible for containing the fuses that manage the operation of the devices installed in the car: in this …
How to change the fog light bulb on a Hyundai Tucson
How to change the fog light bulb on a Hyundai Tucson
Hyundai Tucson (2015-2021 / TL, MK 3) In today's video guide, we will see how to change the fog light bulb on a third-generation Hyundai Tucson. First, we need to remove the cover under t…

Other guides you may be interested in

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos