Do it yourself
Frequently asked questions about cars and motorcycles

Problems caused by diesel leaking on the Iveco Daily.

Model: IVECO Daily MK 2 - Years 1989-2000
Part: Checks and maintenance

This video is very interesting because it shows us the problems that dirty diesel can create on the engine of an Iveco Daily: despite the fuel being heavily contaminated with algae and dirt, the vehicle managed, albeit with difficulty, to bring the YouTuber home. In this case, the first thing to do is to act on the tank and disconnect the pipes, detach the float, clean the bottom of the tank and remove the fuel: the pre-filter that was installed shows some dirt deposits, then we blow into the pipes, both the supply and return ones. The vehicle we see in the video is quite "old", because if it had been of a more modern design, diesel in that condition would have destroyed the pump and injectors. However, we need to clean the diesel filter, unscrewing it and cleaning it, then clean the strainer inside the tank (where we find some real filth) and then reassemble it inside the tank. So let's never run on reserve and be very careful where we refuel: only quality diesel.

Posted on 30 August 2024 by ScegliAuto

Video tutorial

Related tutorials

IVECO Daily (1999-2006 / MK 3) In this video, we examine an Iveco Daily MK3 that sometimes has serious starting difficulties. No errors were found from the diagnostic ports, making…
IVECO Daily (2014-2026 / MK 5) In this video, we see how to regenerate the DPF filter on an Iveco Daily with the DPF warning light on. With the instrument panel off, we put the veh…
IVECO Daily (2006-2020 / MK 4) If you want to access the OBD2 port located inside your Iveco Daily (2009 model), simply follow the steps described below. First, enter the vehicle a…

Other guides you may be interested in

How to Remove the Airbag from Citroen C3

To remove the airbag from a Citroen C3, follow these steps, which you can also see in the attached video. Check the warning light: before proceeding, ensure that the airbag warning light is off and that the horn functions correctly. Disconnect the battery: disconnect the battery to ensure safety during the operation. Locate the holes behind the steering wheel: find the two holes located behind the steering wheel. Insert a long screwdriver: insert a long screwdriver into the holes and press firmly to unlock the internal clips. Remove the airbag: at this point, you can remove the airbag from the steering wheel and disconnect the two internal connectors.

Watch the video!


by ScegliAuto

More videos