Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the glass in the external rearview mirrors of the Iveco Daily

Model: IVECO Daily MK 5 - Years 2014-2026
Part: Side mirror

Today's steps will show us how to disassemble and replace the glass of the external rearview mirrors of the Iveco Daily vehicle. First, we open the front door of the vehicle and start gently prying on the side of the mirror to detach it from the rear supports, disconnecting the small electrical connector to remove it completely; in the same way, we will also disassemble and replace the smaller glass, as shown in the video. At this point, we install the new mirror glasses, finally performing the automatic adjustment!

Posted on 18 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Indicator Bulb on the Iveco Daily Mk5
How to Replace the Indicator Bulb on the Iveco Daily Mk5
IVECO Daily (2014-2026 / MK 5) This guide shows how to replace the direction indicators located on the wing mirrors of the Iveco Daily Mk5. The first step is to remove the two wing…
Fuse box diagram for an Iveco Daily
IVECO Daily Through this very short video tutorial, you can see the diagram of the main fuse box for an Iveco Daily, a model produced from 2000 to 2006. The diag…
Where to Find the Fuse Box of the Iveco Daily 2007
IVECO Daily If you own an Iveco Daily MK2 (2007) and want to find out where the fuse box is located, just read this new mini guide carefully and put into practic…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos