Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the hood rod support on the Fiat Iveco Daily

Model: IVECO Daily MK 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, we will see how to replace the support of the rod that holds the hood on a Fiat Iveco Daily: first of all, we need to remove the pin that is located on the support used to cushion the impact, on the front part of the hood. We can find the new piece, for example, on E-Bay with the code 335406034086 at a price of 18.90 euros + 11.50 euros for shipping.

Once the pin has been removed, we will also remove the support and we can put the new one in its place, simply by fitting it in and putting the new pin to close it. If the rod is not damaged, now we can keep our hood open again.


Posted on 19 March 2025 by ScegliAuto


Related tutorials

Where to Find the Fuse Box on the 2009 Iveco Daily
IVECO Daily If you own a 2009 Iveco Daily and want to find the box containing all the various fuses, simply follow the steps described in this guide. First, turn…
Where is the OBD2 port on the Iveco Daily 2009?
Where is the OBD2 port on the Iveco Daily 2009?
IVECO Daily (2006-2020 / MK 4) If you want to access the OBD2 port located inside your Iveco Daily (2009 model), simply follow the steps described below. First, enter the vehicle a…
How to Open the Bonnet of the New Iveco Daily
How to Open the Bonnet of the New Iveco Daily
IVECO Daily (2014-2026 / MK 5) This guide shows how to open the bonnet of the new Iveco Daily. Like many cars, the opening of the engine compartment on the Iveco Daily is done in t…

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos