Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on an Iveco Daily?

Model: IVECO Daily MK 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

It will be possible to completely reset the Service light on the Iveco Daily by inserting the ignition key into the corresponding lock: once the dashboard is turned on, you can fully press the accelerator pedal for about twenty seconds. After that, you need to press the brake pedal ten times in a row until it reaches the end of its travel; once this operation is completed, you can turn off the dashboard.

In this way, you will be able to turn it back on to check that everything is functioning correctly.


Posted on 1 December 2025 by ScegliAuto


Related tutorials

How to reset the Service light on the Iveco Daily?
How to reset the Service light on the Iveco Daily?
IVECO Daily To reset the Service light on the Iveco Daily, turn the key to switch on the instrument panel and check that the light is illuminated. To reset it, p…
How to Reset the Service Light on an Iveco Daily
How to Reset the Service Light on an Iveco Daily
IVECO Daily To reset the service light on your Iveco Daily, turn the key to activate the instrument panel and ensure the light appears. To reset it, press the ac…
How to Reset the Service Light on the Iveco Daily?
How to Reset the Service Light on the Iveco Daily?
IVECO Daily To reset the Service light on the Iveco Daily, press the accelerator pedal while the vehicle is completely off: while holding it down, turn the key i…

Other guides you may be interested in

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos