Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Iveco Daily

Model: IVECO Daily MK 4 - Years 2006-2020
Part: Service warning light

To reset the service light on the Iveco Daily, ensure the ignition is off. Insert the key and turn it to the "ON" position with the engine off. Fully press the accelerator pedal and hold it down for 15 seconds. While still holding the pedal, press the brake pedal ten times in quick succession, ensuring each press is smooth and complete. After the tenth press, release both pedals at the same time. Now turn off the ignition and restart the engine normally. The service light should now be off.

Posted on 26 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on an Iveco Daily?
How to reset the "Service" light on an Iveco Daily?
IVECO Daily (2014-2026 / MK 5) To reset the "Service" light on an Iveco Daily, start by pressing and holding the accelerator for 10 seconds. Continue holding the accelerator while …
How to reset the service light on the Iveco Daily
How to reset the service light on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) To reset the service light on the Iveco Daily, follow these steps: Turn on the Iveco Daily and ensure the service light is displayed on the dashboard…
How to reset the Service light on the Iveco Daily?
How to reset the Service light on the Iveco Daily?
IVECO Daily To reset the Service light on the Iveco Daily, turn the key to switch on the instrument panel and check that the light is illuminated. To reset it, p…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos