Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulbs of the Iveco Daily

Model: IVECO Daily MK 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light

See other generations:
Video tutorial

Here are the instructions to remove and replace the bulbs of the rear light of the Iveco Daily. First, open the rear doors and start unscrewing the internal screws of the rear light, located behind it; then disconnect the electrical connector of the bulbs to remove the light, as shown in the video.

At this point, separate the bulb holder from the bulbs, replacing any faulty stop lights with new ones; then reassemble and refit the rear light, reconnecting it electrically and checking the operation of all stop lights.


Posted on 10 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the Iveco Daily
How to Replace the Front Headlamp Bulb on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) The following video tutorial shows how to independently replace the front headlamp bulb on the Iveco Daily. Open the front bonnet and position yourse…
Where is the left dipped beam fuse in the Iveco Daily van?
IVECO Daily If the left dipped beam of the Iveco Daily van suddenly stops working, and the bulb is in good condition, it is likely that the corresponding fuse ha…
Replacing the Timing Belt of the Iveco Daily
Replacing the Timing Belt of the Iveco Daily
IVECO Daily In this guide, we will go through the steps to remove and replace the timing belt of the Iveco Daily. First, open the bonnet and remove the front bum…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos