Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Warning Light on Iveco Daily

Model: IVECO Daily MK 4 - Years 2006-2020
Part: Service warning light

To reset the oil warning light on the Iveco Daily, follow this simple procedure: turn the key to switch on the instrument panel without starting the engine, press the accelerator pedal fully and hold it down for fifteen seconds. After fifteen seconds, while still holding the accelerator pedal down, press the brake pedal ten times. On the tenth press, do not release it and keep both pedals pressed. Turn the key and switch off the instrument panel. Release the pedals, switch on the instrument panel, and start the engine. If you have done everything correctly, the oil warning light will turn off.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Warning Light on an Iveco Daily
How to Reset the Oil Warning Light on an Iveco Daily
IVECO Daily Resetting the oil warning light on an Iveco Daily is a simple task that can be done independently. This short video tutorial will guide you step by s…
How to reset the oil light on the Iveco Daily 4
How to reset the oil light on the Iveco Daily 4
IVECO Daily (2006-2020 / MK 4) If you own an Iveco Daily Mk4 and want to manually reset the engine oil light that remains on even after changing the oil and filter, you must follow…
How to Reset the Service Light on an Iveco Daily?
How to Reset the Service Light on an Iveco Daily?
IVECO Daily Today, let's learn how to reset the oil change service light on an Iveco Daily by following the instructions below. First, get inside the vehicle and…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos