Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service reset on an Iveco Daily 2020

Model: IVECO Daily MK 5 - Years 2014-2024
Part: Warning light – error code

In today's tutorial, you will be able to see the entire operation step by step to perform a service reset on a 2020 Iveco Daily. First, we press and hold down the accelerator pedal, then turn on the vehicle's ignition without starting the engine. Next, we wait for the dashboard check, and while still holding down the accelerator, we press the brake pedal seven times, keeping it pressed down on the seventh time for at least ten seconds as shown in the video. Finally, we release both pedals and restart the vehicle to complete the operation.

Posted on 16 May 2024 by ScegliAuto

Video tutorial

Related tutorials

To reset the service light on the Iveco Daily.
To reset the service light on the Iveco Daily.
IVECO Daily (2014-2024 / MK 5) To reset the service light on the Iveco Daily, you can follow these steps: Turn on the Iveco Daily and make sure the service light is displayed on th…
How to reset the Iveco Daily service light
How to reset the Iveco Daily service light
IVECO Daily (2014-2024 / MK 5) If you notice the service warning light on the on-board computer display of your Iveco Daily, do not worry because the solution exists and it is also…
How to reset the Iveco Daily service light
How to reset the Iveco Daily service light
IVECO Daily (2014-2024 / MK 5) Manually resetting the Iveco Daily service light is so simple that it really takes a few seconds to perform correctly. First insert the key and turn …

Other guides you may be interested in

How to Replace the Bulbs on a Nissan Almera Rear Light

Do you want to change the damaged bulb of a rear light on a Nissan Almera? Follow this video carefully to proceed correctly. Open the boot, remove the fabric side covering, and detach the plastic rivets on the covering. Unscrew the retaining bolts of the rear light using a socket spanner. Once the light is free from the bolts, pull the rear light out of the metal housing, then disconnect the power cable. Place the stop light on a comfortable surface and replace all worn bulbs. To refit the rear light, position it in its housing and tighten all screws after reconnecting the lighting connector.

Watch the video!


by ScegliAuto

More videos