Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to dismantle the external rearview mirror of the Iveco Daily

Model: IVECO Daily MK 5 - Years 2014-2024
Part: Side mirror

The following steps will illustrate the process of disassembling and replacing the external rearview mirror of the Iveco Daily. First, let's move to the outside and start unscrewing the screws located on the mirror cap; open the door and remove the internal plastic cover, unscrewing additional screws and disconnecting the electrical connector for adjustment, as shown in the video. At this point, we remove the mirror from the outside and replace it with the new one; secure it properly and make the connection, finally adjusting the glass!

Posted on 11 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the external rearview mirror of the Iveco Daily.
Disassembly of the external rearview mirror of the Iveco Daily.
IVECO Daily (2014-2024 / MK 5) Today's guide will show us how to disassemble and replace the external rearview mirror of the Iveco Daily, in simple steps. First, we open the front …
How to disassemble the external rearview mirror in the Iveco Daily van?
How to disassemble the external rearview mirror in the Iveco Daily van?
IVECO Daily In this tutorial, we can see how to disassemble the external rearview mirror in the Iveco Daily van, a very simple and fast operation. First of all, …
Mounting the external rearview mirror on Iveco Daily Camper
Mounting the external rearview mirror on Iveco Daily Camper
IVECO Daily (2006-2020 / MK 4) Let's see in this short video how to install the exterior rearview mirror on an Iveco Daily Camper, following these simple steps. First of all let's …

How to Remove the Fuel Pump on Toyota Verso

Let's see how to remove the fuel pump on a Toyota Verso. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; unscrew the securing screws of the metal cap and remove it. Wrap the entire perimeter of the metal panel with paper or an absorbent cloth, then, using a screwdriver and hammer, unscrew the large bolt around the pump. Disconnect the power terminals and the fluid circulation tubes. Extract the fuel pump. To reassemble, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos