Do it yourself
Frequently asked questions about cars and motorcycles

Removal of Glove Compartment

Model: Jaguar Xe MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Glove compartment

Video tutorial

Removing the glove compartment is very simple and requires only a Torx key of size 20 and a screwdriver of the same type; once the glove compartment door is open, there are two Torx screws at both ends of the upper edge, another two at the bottom of the compartment, and then three star-type screws along the lower edge.

Once all screws are removed, you can extract the glove compartment from its seat.

The only recommendation during the disassembly process is to be careful not to scratch the external surfaces with the tools.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Jaguar Xe (2015-2024 / MK 1) Below we will see the instructions that will allow us to replace the cabin air filter of the Jaguar XE. First, let's open the front passenger door an…
Jaguar Xe (2015-2024 / MK 1) In this video tutorial, you can see how to replace the cabin filter on a Jaguar XE by following some simple steps: first, purchase a new pollen filte…
Jaguar Xe (2015-2024 / MK 1) Before removing the engine management ECU, it is advisable to disconnect both battery terminals and connect them to discharge all electrolytic capaci…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos