Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin air filter for the Jaguar XE.

Model: Jaguar Xe MK 1 - Years 2015-2024
Part: Cabin air filter

Below we will see the instructions that will allow us to replace the cabin air filter of the Jaguar XE. First, let's open the front passenger door and start removing the side cover of the dashboard; then, we open the glove compartment and unscrew the fastening screws with a T30 torx key or screwdriver, in order to remove it, as shown in the video. At this point, we remove the pollen filter cover, take out the old cartridge, and replace it with the new one; we insert the new cartridge in the correct direction and finally reassemble the cover and the glove compartment!

Posted on 21 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Oil Maintenance Light on a 2018 Jaguar XE
Resetting the Oil Maintenance Light on a 2018 Jaguar XE
Jaguar Xe (2015-2024 / MK 1) In this video tutorial, see how to reset the oil maintenance light on a 2018 Jaguar XE by following a few simple steps. The first thing to do is perf…
Battery Replacement for the Jaguar XE
Battery Replacement for the Jaguar XE
Jaguar Xe (2015-2024 / MK 1) This guide provides instructions for removing and replacing the battery in the Jaguar XE. First, open the boot lid and start by removing the floor pa…
Replacing Courtesy Light on Jaguar XE 2.2
Replacing Courtesy Light on Jaguar XE 2.2
Jaguar Xe (2015-2024 / MK 1) Today we will discuss the Jaguar XE, a prestigious car from the British group, and specifically how to replace the courtesy light located in the side…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos