Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on Jaguar X-Type

Model: Jaguar X-Type MK 1 - Years 2001-2009
Part: Air filter

In this video tutorial, learn how to replace the air filter on a Jaguar X-Type by following these simple steps: First, purchase a new air filter. Next, get inside the vehicle, turn off the engine, and pull the handbrake. The air filter is located in the engine bay, so lift the bonnet and secure it with the prop rod. Remove the fasteners for the engine cover. Once the cover is removed, locate the filter box, then remove the fasteners for the filter box and slightly lift the cover; remove the old filter, clean the housing, and fit the new filter.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Connect Your Smartphone to the Bluetooth of a Jaguar X-Type
How to Connect Your Smartphone to the Bluetooth of a Jaguar X-Type
Jaguar X-Type (2001-2009 / MK 1) .. begin, sit in the driver's seat of your Jaguar X-Type. Start by activating the car radio, and then enable Bluetooth on your smartphone. Once Bluetooth.. …
How to Replace the Air Filter on a Jaguar XF
How to Replace the Air Filter on a Jaguar XF
Jaguar X-Type (2001-2009 / MK 1) Do you want to change the air filter on your Jaguar and don’t know how? Watch this video to see how to proceed with the removal and reassembly. Open …
Removing Fuses on Jaguar X Type
Removing Fuses on Jaguar X Type
Jaguar X-Type (2001-2009 / MK 1) .. Let's look at removing the fuses on the Jaguar X Type. Lift the front bonnet of the car and locate the fuse box. Disconnect the cover next to the vehicle's.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos