Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Jaguar XE

Model: Jaguar Xe MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Air filter

Video tutorial

In this video tutorial, you can see how to replace the air filter on a Jaguar XE by following some simple steps: first, purchase a new air filter from an authorised dealer; the second step is to get inside the vehicle, switch off the engine, and pull the handbrake.

Lift the bonnet and secure it with the prop rod. Loosen the clamp on the intake hose and disconnect the hose; remove the fasteners of the filter box (be careful not to damage the sensor).

Take out the old filter element and clean the housing of any debris. Position the new filter element in place and reassemble all parts in reverse order.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Jaguar XE
How to Replace the Cabin Filter on a Jaguar XE
Jaguar Xe (2015-2024 / MK 1) In this video tutorial, you can see how to replace the cabin filter on a Jaguar XE by following some simple steps: first, purchase a new pollen filte…
Replacement of the cabin air filter for the Jaguar XE.
Replacement of the cabin air filter for the Jaguar XE.
Jaguar Xe (2015-2024 / MK 1) Below we will see the instructions that will allow us to replace the cabin air filter of the Jaguar XE. First, let's open the front passenger door an…
Where to Find the Fuse Box of the Jaguar XE
Where to Find the Fuse Box of the Jaguar XE
Jaguar Xe (2015-2024 / MK 1) To locate the fuse box of your Jaguar XE, you only need a few seconds. Follow these steps. First, park your Jaguar XE safely on a flat surface. Then,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos