Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Jaguar XJ

Model: Jaguar Xj X350 - Years: 2003, 2004, 2005, 2006, 2007
Part: Air filter

See other generations:
Video tutorial

In this video tutorial, we can see how to replace the air filter on a Jaguar XJ: the first step is to purchase a new air filter from an authorised dealer. The next step is to lift the front bonnet of the car and secure it with the appropriate prop.

Disconnect the MAF sensor connector; if it is a biturbo, you should find two sensors to disconnect. Use a flathead screwdriver to loosen the clamps holding the intake hose onto the air filter box. Once the clamps are loosened, disconnect the hose from the filter box. Remove the small tube located at the bottom of the airbox; detach the cover by unfastening the clips and pull out the old filter element from its housing.

Clean the filter housing and then position the new filter in place.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in the Jaguar XJ
How to Replace the Cabin Air Filter in the Jaguar XJ
Jaguar Xj (2009-2019 / MK 9, X351) To correctly replace the cabin air filter in your Jaguar XJ, follow the steps in this mini guide. First, reach the front passenger seat and focus on …
Where to Find the Fuse Box of the Jaguar XJ
Where to Find the Fuse Box of the Jaguar XJ
Jaguar Xj (2009-2019 / MK 9, X351) If you need to access the fuses of your Jaguar XJ (2009-2019) but do not know where they are located, do not worry as you can easily find the box con…
Where to Find the Fuse Box on a Jaguar XJ
Where to Find the Fuse Box on a Jaguar XJ
Jaguar Xj (2009-2019 / MK 9, X351) Unlike many other cars, the fuse box on the Jaguar XJ is not located inside the dashboard or under the bonnet. Below, we will discover the steps to l…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos