Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuse Box of the Jaguar XE

Model: Jaguar Xe MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Fuse box

Video tutorial

To locate the fuse box of your Jaguar XE, you only need a few seconds. Follow these steps.

First, park your Jaguar XE safely on a flat surface. Then, turn off the engine completely and move to the front passenger seat.

At this point, identify the small compartment located on the lower right side of the dashboard. Once you find it, remove the plastic cover with your hands, and you will finally have access to all the fuses you were looking for.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of the Jaguar XE?
How to Remove the Door Panel of the Jaguar XE?
Jaguar Xe (2015-2024 / MK 1) To remove the door panel of the Jaguar XE, you need to detach the trim around the internal handle and the one located on the side of the door. This w…
Where to Insert the Physical Key of the Jaguar XE
Where to Insert the Physical Key of the Jaguar XE
Jaguar Xe (2015-2024 / MK 1) This guide shows how to open and start the Jaguar XE when the remote is flat. To open the driver's door, extract the mechanical key from the remote b…
How to Use the Automatic Gearbox on Jaguar XE
How to Use the Automatic Gearbox on Jaguar XE
Jaguar Xe (2015-2024 / MK 1) Using the automatic gearbox is very convenient if you know how to operate it. For safety, the lever must always be in "Park" when the car is stationa…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos